USB Interface Solar Controller When Using A 12V Battery Practical

Description

Product Description
Feature:
*A controller that can charge three types of batteries (-acid, ternary lithium, and lithium iron phosphate)
*Wide range of applications, supporting various batteries and working environments
*6 major protections: overcurrent protection, short circuit protection, undervoltage protection, reverse connection protection, temperature compensation, overvoltage protection
*LCD display: intuitive, clear and easy to use
*Dual USB output interface: digital standard port, which can accommodate various digital USB interfaces on the market
*Large wiring port: effectively reduce circuit voltage drop and reduce losses
*SOC intelligent control: Intelligent optimized SOC control is realized based on the expert controller
*Auto-stop when full, plus floating charging function
Specification:
Model: CPLS 30
voltage: 12V/24V automatic identification
Rated charge and discharge current: 30A
Rated discharge current: 10A
Maximum photovoltaic voltage: when using a 12V battery, the maximum voltage is 23V; when using a 24V battery, the maximum voltage is 46V
Battery type: -acid battery/lithium-ion battery (ternary lithium)/lithium iron phosphate battery
Charging cut-off voltage: -acid battery: default value 14.4V (not adjustable); ternary lithium battery: default value 12.6V (not adjustable); lithium iron phosphate battery: default value 14.6V (not adjustable)
Discharge recovery voltage: -acid battery: default value 12.6V (adjustable 11.5V-13V); ternary lithium battery: default value 10.5V (adjustable 10V~11V); lithium iron phosphate battery: default value 12.0V (adjustable 11.5V~12.5V)
Discharge cut-off voltage: -acid battery: default value 10.7V (adjustable 9.5V-11.5V); ternary lithium battery: default value 9.0V (adjustable 8.5V-9.5V); lithium iron phosphate battery: default value 10.0V (adjustable 9.5V~10.5V)
Float charge voltage: -acid battery: default value 13.7V (adjustable 13V~15V); ternary lithium battery: default value 12.0V (adjustable 11.5V~12.5V); lithium iron phosphate battery: default value 13.8V (adjustable 13.8V Adjust 13V-14.5V)
USB output: 2 USB outputs, maximum 5V/2A
Standby current: <10mA
Working temperature: -35℃~+60℃
Size/weight: 133*70*35mm/140g
*The marked voltage parameters only correspond to the 12V . If using a 24V , please multiply by 2.
connection
1. Connect the positive and negative terminals of the battery to the controller as shown in the figure, and the controller will automatically detect the battery voltage.
2. Connect the positive and negative poles of the load to the controller as shown in the figure. Be careful not to reverse the connection.
3. Connect the solar panel to the controller as shown in the picture.
Packing list:
1*30A solar controller
1*Instruction manual
Note:
1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness.
2. Please allow slight manual measurement deviation for the data.
Payment
Payment must be completed within 5 days. If you have any problems about payment, please contact us via ebay message.
Delivery details
We only
ship to confirmed ebay Order addresses.
Please comfirm that your Order address is in line with your shipping address.
Please kindly note that
the c
ombined shipping
is not provided
because the shipping fee is calculated by weight. Also, the each additional item means
exactly
the the same color and size.
It takes about
7
-15 working days to US; about 10-30 working days to other countries.
Transit time may be a little delayed because of the
bad
weather and customs
inspection
. If you
do
not receive your
item
within 30 working days since payment finished, please contact us immediately for further assistance.
Contact us
We strive for 100% customer satisfaction! Positive Feedback is very important to us. If you have any questions,
p
lease feel free to contact us via "Ask seller a question" . We will reply your email within 24
working hours.
On Jul 3, 2024 at 12:18:11 PDT, seller added the following information: